DigiPlus stock

List of contents of this article:

• 1,DigiPlus stock The best way to remove engine sludge by yourself
• 2, How to deal with the oil sludge of the engine
• 3, How to clean the engine internal sludge

The best way to remove the engine sludge by yourself

Use detergent: Pour the engine cleaner into the fuel tank,After idling for 5-10 minutes, empty the old oil with detergent in the engine, replace the oil filter, and add new oil.

Engine oil cleaning method: use alkaline water, gasoline soaking method, toothpaste, go to a 4S store or auto repair shop. Use alkaline water: Wash with alkaline water dissolved in salt, or wipe the oily area of the engine with alcohol solution, and then clean it with water.

Clean with detergent. This is mainly the cleaning agent of the engine, poured into the fuel tank. After idling for five to ten minutes, pour in the old oil with detergent and empty it. After that, you need to replace the oil filter and add new oil.

Replacement of fuel filter. Fuel filter can filter out impurities and effectively protect the engine from pollution. Therefore, the fuel filter should be replaced in time to prevent the accumulation of unnecessary dirt.Regular inspection. Check the engine regularly so that any pollution and sediment can be detected and removed in time to keep the engine healthy.

How to deal with the oil sludge of the engine

1. There is a lot of oil sludge in the engine, which needs to be cleaned patiently. If it is not cleaned, it will be sealed with protective agent dust. The intake pipe of the engine should also be cleaned to prevent the oil sludge from corroding it and causing leakage. This work also requires a lot of patience and take your time.

2. There is oil mud in the engine, and it is recommended that everyone must clean it.

3. Use detergent: pour the engine cleaner into the engine fuel tank and idle for 5-10 minutes (if the engine has not been cleaned for a long time, it can be appropriately delayedLong cleaning time), empty the old oil with detergent in the engine, replace the oil filter, and add new oil.

How to clean the internal oil sludge of the engine

At this time, note that some parts in the engine compartment cannot be stained with water. You can disassemble these parts, put them in one piece, and wipe them together with a rag dipped in detergent. You need to wait a few minutes after spraying the detergent, because the detergent will work.

If you want to clean the sludge in the engine, you can use a special sludge to clean the oil. After releasing all the oil, add the cleaning oil to the engine, then let the engine idle for 15 minutes, and then release the cleaning oil.

If you want to clean the oil sludge in the engine, you can use a special oil sludge to clean the oil.After draining the oil, add cleaning oil to the engine, then let the engine idle for 15 minutes, and then drain the cleaning oil. It is normal to have some sludge inside the car engine for a long time, and it is also normal to have carbon inside the engine.

The cleaning method is to inject the oil sludge cleaner into the engine from the engine oil filling port before the vehicle changes the oil, and start the engine to maintain idling for 5 to 10 minutes, and then turn off the engine to change the oil sludge cleaner and release it together with the oil.

Use detergent: Buy detergent and introduce it into the engine fuel tank, operate the idle state, and check the situation after 10 minutes of starting. If it has not been cleaned, the cleaning time should be extended later. After that, empty all the old oil in the engine, and then replace the filter and pour it in. The new engine oil is fine.